This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License
|
||||||||
|
Paper Details
Paper Title
A review on optimization of process Peramater of fused deposition modeling for Better Dimentional Accuracy
Authors
  Raviprakash Chinubhai Patel,  Satyam Patel,  Jaimin Patel
Abstract
The quality of FDM produced parts is significantly affected by various parameters used in the process. In this present work three important process parameters of the FDM process such as layer thickness, part build orientation and raster width are consider. Their influence on three responses such as percentage change in length, percentage change in width and percentage change in thickness of the test specimens are studied with material of polycarbonate. The powerful Taguchi’s method is used for design of experiments because of it can be provide simplification of design plan and reduced the number of experiments runs. Specimens are prepared for dimensional accuracy.
Keywords- FDM Machine, Layer thickness, Orientation angle, Raster Width, Dimensional accuracy, Taguchi method.
Publication Details
Unique Identification Number - IJEDR1402055Page Number(s) - 1620-1624Pubished in - Volume 2 | Issue 2 | June 2014DOI (Digital Object Identifier) -    Publisher - IJEDR (ISSN - 2321-9939)
Cite this Article
  Raviprakash Chinubhai Patel,  Satyam Patel,  Jaimin Patel,   "A review on optimization of process Peramater of fused deposition modeling for Better Dimentional Accuracy", International Journal of Engineering Development and Research (IJEDR), ISSN:2321-9939, Volume.2, Issue 2, pp.1620-1624, June 2014, Available at :http://www.ijedr.org/papers/IJEDR1402055.pdf
Article Preview
|
|
||||||
|