Design and Implementation for Monitoring and Fault Diagnosis in Wind Turbine Using Arm Controller and CAN Bus System

  Dinesh.T

This paper is a CAN based architecture designed for the purpose of monitoring and fault diagnosis of wind turbine. In this project we declare the system with ARM and CAN protocol to monitor and diagnose the problems in the wind turbine application. The project deals with the data transmission between two units in the exact time without any disturbance. The data transmission time is increased with the CAN protocol. ARM core1 runs with CAN and LPC2148 as wind turbine unit to which sensors are connected and ARM core2 as Fault diagnose and monitoring section. A discussion about weather condition (WC) monitoring and generation voltage (GV) display is also added in this design. Data acquisition node collects the sensor data through CAN protocol. The basic view of this technique is to reduce the possibility of fault diagnosis and increase the monitoring of wind turbine.

Keywords- CAN bus, ARM controller

Unique Identification Number - IJEDR1502007
Page Number(s) - 31-33
Pubished in - Volume 3 | Issue 2 | May 2015
DOI (Digital Object Identifier) -   
Publisher - IJEDR (ISSN - 2321-9939)

  Dinesh.T,   "Design and Implementation for Monitoring and Fault Diagnosis in Wind Turbine Using Arm Controller and CAN Bus System", International Journal of Engineering Development and Research (IJEDR), ISSN:2321-9939, Volume.3, Issue 2, pp.31-33, May 2015, Available at :http://www.ijedr.org/papers/IJEDR1502007.pdf