This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License
|
||||||||
|
Paper Details
Paper Title
Design and Fabrication of Brake Pedal for All Terrain Vehicle
Authors
Nand Mangukia, Nandish Mangukia
Abstract
The brake pedal is again a very crucial component of an ATV as it would control the overall braking of the vehicle. Proper braking is very crucial in rough terrains with all four wheels locking so that the stopping distance is minimum. Hence a brake pedal needs to be designed in such a way it provides the necessary leverage and creates enough pressure for the brake fluid to reach all four wheels. A brake is a mechanical component that constrains the motion by absorbing the energy from the motion of the vehicle. When the brake pedal of the hydraulic braking system is pushed against the master cylinder, a piston pushes the brake pad against the brake disc which reduces the speed of the vehicle or stops the vehicle completely. Hence the brake pedal should be able to push the piston in the master cylinder completely with a full-length stroke and thereby provide equal pressure to all wheels.
Keywords- Brake Pedal, Brake Force, Pedal, Pedal stress, ATV, All terrain vehicle
Publication Details
Unique Identification Number - IJEDR1802101Page Number(s) - 562-568Pubished in - Volume 6 | Issue 2 | April 2018DOI (Digital Object Identifier) - Publisher - IJEDR (ISSN - 2321-9939)
Cite this Article
Nand Mangukia, Nandish Mangukia, "Design and Fabrication of Brake Pedal for All Terrain Vehicle", International Journal of Engineering Development and Research (IJEDR), ISSN:2321-9939, Volume.6, Issue 2, pp.562-568, April 2018, Available at :http://www.ijedr.org/papers/IJEDR1802101.pdf
Article Preview
|
|
||||||
|
|
||||||||
