This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License
|
||||||||
|
Paper Details
Paper Title
Power Divider for 4X4 Multiport Amplifier
Authors
  Nikunj V Prajapati,  A K. Sisodia
Abstract
This paper presents the design and simulation of 2.5 GHz 90 degree Hybrid power divider for 4X4 multiport amplifier. The multiport amplifier is an advanced technique which provides the flexibility of channel capacity per beam in a multi beam system. It is also used the implementation of the mobile base station for shearing the power in each transmission path. Most of the multiport amplifiers use butler matrix using the 90 degree hybrid power divider (4X4). The output amplitude and phase shift of the 90 degree hybrid power divider are critical parameters for achieving the optimum performance of the MPA. The key point is analysis of 2.5 GHz 90 degree Hybrid power divider (4X4) for better power on the multiport amplifier. Hence a four way power divider for MPA for base station has been design, simulated and optimizes using the Advance design system software 2011.
Keywords- 4 Way 90 degree Hybrid power divider, ADS software, Optimization design
Publication Details
Unique Identification Number - IJEDR1401187Page Number(s) - 1044-1049Pubished in - Volume 2 | Issue 1 | March 2014DOI (Digital Object Identifier) -    Publisher - IJEDR (ISSN - 2321-9939)
Cite this Article
  Nikunj V Prajapati,  A K. Sisodia,   "Power Divider for 4X4 Multiport Amplifier", International Journal of Engineering Development and Research (IJEDR), ISSN:2321-9939, Volume.2, Issue 1, pp.1044-1049, March 2014, Available at :http://www.ijedr.org/papers/IJEDR1401187.pdf
Article Preview
|
|
||||||
|